62 Hz - 21 kHz
Frequency range
en
Available now as All Black Edition
Active master-slave system
SC203
SC203
The compact SC203 system grants a detailed sound reproduction for small workspaces
Available now as All Black Edition
Active master-slave system
The compact SC203 system grants a detailed sound reproduction for small workspaces
The most important features at a glance
Frequency range
Woofer size
Max. SPL
EVE Audio monitors feature high-resolution DSP electronics for precise room adaptation. Users can control filters, volume, and adjustments directly from the monitor using the rotary SMART-knob. The DSP is supported by a high-quality A/D converter, ensuring signal integrity. Settings are easily lockable to prevent accidental changes, offering a user-friendly and reliable design.
Our studio monitors use Air Motion Transformers to reproduce high frequencies with accuracy and low distortion. The hand-folded diaphragm produces sound waves 4x more efficiently than traditional tweeters. To complete our systems we developed glass-fiber coated SilverCone woofers providing a tight, dynamic bass with minimal distortion.
EVE Audio uses a passive radiator design in their subwoofers, replacing traditional bass reflex tubes. This eliminates noise from air turbulence and pipe resonances while reducing subsonic excursions and intermodulation distortion. The design allows for lower tuning frequencies in compact cabinets, providing high-quality sound in smaller monitors.
EVE Audio prioritizes efficient, clean design by eliminating unnecessary elements like front-facing bass ports. Instead, we use a tuned, larger rear rectangular port without hard edges, enhancing low-frequency efficiency and reducing distortion at high volumes. This design delivers punchy bass without the drawbacks of port compression, ensuring monitors that sound as good as they look.
Take full control of your EVE Audio subwoofer with our intuitive remote control. Adjust the volume, switch between different settings and fine-tune your bass levels with ease—all from the comfort of your listening position. Experience seamless integration and enhanced precision, ensuring your audio setup is always optimized to your preferences.
We source materials from top suppliers and ensure the highest level of craftsmanship. As a testament to German engineering excellence, each product undergoes meticulous, individual quality control in our Berlin factory before shipping. This guarantees that every customer receives a top-of-the-line product they can trust.
EVE Audio monitors feature high-resolution DSP electronics for precise room adaptation. Users can control filters, volume, and adjustments easily with the front-facing SMART-knob. The DSP is supported by a high-quality A/D converter, ensuring signal integrity. Settings are easily lockable to prevent accidental changes, offering a user-friendly and reliable design.
Our studio monitors use Air Motion Transformers to reproduce high frequencies with accuracy and low distortion. The hand-folded diaphragm produces sound waves 4x more efficiently than traditional tweeters. To complete our systems we developed glass-fiber coated SilverCone woofers providing a tight, dynamic bass with minimal distortion.
EVE Audio uses a passive radiator design in their subwoofers, replacing traditional bass reflex tubes. This eliminates noise from air turbulence and pipe resonances while reducing subsonic excursions and intermodulation distortion. The design allows for lower tuning frequencies in compact cabinets, providing high-quality sound in smaller monitors.
EVE Audio prioritizes efficient, clean design by eliminating unnecessary elements like front-facing bass ports. Instead, we use a tuned, larger rear rectangular port without hard edges, enhancing low-frequency efficiency and reducing distortion at high volumes. This design delivers punchy bass without the drawbacks of port compression, ensuring monitors that sound as good as they look.
Take full control of your EVE Audio subwoofer with our intuitive remote control. Adjust the volume, switch between different settings, and fine-tune your bass levels with ease—all from the comfort of your listening position. Experience seamless integration and enhanced precision, ensuring your audio setup is always optimized to your preferences.
We source materials from top suppliers and ensure the highest level of craftsmanship. As a testament to German engineering excellence, each product undergoes meticulous, individual quality control in our Berlin factory before shipping. This guarantees that every customer receives a top-of-the-line product they can trust.
The SC203
When a small footprint – but a big sound! – is what you're looking for, the SC203 becomes one of those few examples where small also means powerful. It is the perfect solution for professional desktops with a limited amount of physical space, for discerning home and gaming users, and for mobile studios during travel.
To further extend its flexibility, each speaker is provided with the FlexiPad, a rubberized pad that allows you to decouple the speaker from its base and angle it precisely at 0°, 7,5° or 15°.
Accessories include our SC203 Mounting Adapter, which enables you to mount your speaker directly on any microphone or speaker stand that features a 3/8" thread. Combining it with our threaded wall mount adapter it is possible to place your speaker directly on a wall. By placing the FlexiPad between the speaker and the mounting adapter you are further decoupling unwanted resonances, and can even better arrange orientation for upright positioning.
Even if the focus is on the sound - our monitors offer a holistic solution that is well thought out from A to Z
Simply set and save filters & volume.
For precise bass reproduction without background noise.
For precise bass reproduction without background noise.
Your settings are saved (even without power).
A slow volume increase when switching on protects ears and equipment.
Tech Talk
When using woofers in small desktop speakers, some special considerations have to be taken into account. To meet the demands of a precise reproduction in the low frequency region, we've developed a 3" woofer coupled with a 1" voice coil capable of handling a longer linear excursion. With a 16 mm-height voice coil, a linear, back and forth, swing of ±5mm is easily achieved. However, this requires an appropriate multilayer paper membrane material that is capable of withstanding such rigorous use while maintaining consistency.
After numerous careful tests, coated paper turned out to be the very best solution in order to meet this demand for low resonance, stability and transmission linearity. From then on, the entire construction design met all the necessary requirements that such small woofers usually entail, including having a chassis basket permeable to air in order to minimize distortions. The large driver magnet works as a powerful "engine" so as to keep the woofer stable, even in border areas.
A passive radiator – which you could simply think of as a passive speaker that moves through the force of air – located at the backside of the SC203, reinforces the reproduction of low frequencies and allows the speaker response to go down as low as an impressive 62Hz (-3dB) with very low distortion.
Each SC203 setup is configured as a 2-way master-slave system, and features four power amplifiers. Each woofer and tweeter gets its own dedicated 30W PWM amplifier with separate filter section for precise control. And for optimal connectivity, the SC203 houses three inputs – analog RCA, digital optical and USB – which will allow you to conveniently connect a wide range of sources. Furthermore, a volume controlled subwoofer output lets you connect an additional subwoofer (TS107 und TS108) to the master speaker and create a powerful 2.1 system. A DIP switch located at the speaker's back panel allows you to select the SC203's to work as "satellites" from 80Hz and upwards, or as a full range units.
Chrysanthemum Bridge
Interview with Mr. Shingo Yasumoto of Japanese producer team "Chrysanthemum Bridge" on installing EVE SC203.
The extra compact Air Motion Transformer
The simple goal of bringing the sound quality, low distortion and high resolution of our now famous Air Motion Transformer tweeter to a much smaller format speaker took us on a many-month journey to find the perfect solution for the SC203. In the end, a new tweeter was born: the new µA.M.T.
This high resolution µA.M.T. delivers an astonishing high frequency resolution combined with extraordinary precision and clarity. The folded membrane of this high resolution µA.M.T. is only 400mm² in surface area, about less than half as our RS1 tweeter (which is used, for example, in the SC204 speaker). An integrated waveguide helps create an optimal dispersion pattern over a wide frequency range. No fighting over your sweet spot with this tweeter!
To complete the system, we've used strong neodymium magnets, coupled with a magnetic holder and membrane holder optimized for very low distortion values at the specified SPL. As usual with EVE Audio, no cutbacks were made to save money at the expense of a high quality tuned system.
Non-detachable loudspeaker grilles protect both, woofer and µA.M.T. tweeter against damage.
Our tweeters base on the ribbon tweeter technology. We reinvented our own version of the AMT which our speakers are well known for.
Understanding the Air Motion Transformer
The Air Motion Transformer (AMT) is a unique driver technology, distinct from other audio drivers. It utilizes a lightweight, hand-folded diaphragm that is thinly coated with aluminum. The current of the music signal flows through these conductive strands.
The diaphragm is placed in a powerful magnetic field leading to movement in the folds caused by the Lorentz force. Due to the opposing direction of the current the walls of each single fold work against each other. The air between the folds is squeezed in and out at a ratio of 1:4, compared to the 1:1 ratio of a regular dome tweeter.
This results in higher resolution and dynamics in the tweeter section, along with a very low distortion level, allowing superior sound quality with enhanced detail and clarity.
Press and hold the control three seconds in order to put the monitor in Standby mode. The volume will decrease gradually while the LED ring lights up once around the Volume control. Afterwards, the LED on the right end will remain dimly lit and the power consumption is reduced to 1 watt.
The volume can be adjusted by turning the knob. Depending on the LED mode selected, the volume will be displayed as a dim/ bright circle or as a dim/bright point.
To put the monitor in Mute Mode, turn the volume control counter clockwise until you reach the minimum level. When the LED on the left end lights up dimly the Mute Mode is activated.
Press the SMART-knob once to enter the Settings menu. Here you can set different filters as well as the LED ring’s behavior. The LED of the currently active function blinks. Click the different filters above to find out more about them!
The High-Shelf Filter helps you adjust frequencies above 3kHz in 0.5dB increments. You may need it in the following situations:
Distance from Speakers: High frequencies weaken as you move further from the speakers. If you sit far from the speakers, boost the high frequencies. If you're close, like in a desktop setup (about 1 meter or 3 feet away), you might need to reduce the high frequencies.
Room Acoustics: In a room with few reflective surfaces ("dead room"), boosting high frequencies can create a more balanced sound. Conversely, in a room with many reflective surfaces, reducing the high frequencies is advisable.
Adjust the High Filter accordingly and achieve the best sound quality based on your listening position.
The Mid Filter is a bell filter centered at 1kHz. It allows you to boost or cut the midrange by up to +/-3dB in 0.5dB increments. Here's what you should consider:
Frequency Balance: The midrange is crucial for balancing lower and higher mid frequencies. Use the Mid Filter to fine-tune the balance between the fundamental and harmonic frequencies in your music.
Room Acoustics: The acoustics of your room can affect how midrange frequencies are perceived. Sound energy from the monitors may reflect off surfaces like walls, floors, and ceilings, altering the sound. Adjust the Mid Filter to compensate for these reflections and achieve a balanced sound.
The Mid filter is available on SC2070, SC3070, SC4070, SC3010 and SC3012.
The desk filter allows you to boost or cut you low-mid frequencies in 0.5dB increments:
Narrow-Band EQ: Depending on the model the filter is centered between 160 and 200Hz. When turned down, it reduces the low-mid boost often caused by reflections from mixers and similar surfaces. Decrease the filter gain to lessen this effect.
EQ at 80Hz: When turned up, it enhances the lower frequencies, giving more punch to the sound.
The Low-Shelf Filter allows you to boost or attenuate frequencies below 300Hz in 0.5dB steps. Here's when to use it:
Attenuating Low Frequencies: If your room's acoustics cause a boost in low frequencies (due to room modes or speakers being close to walls), you can reduce them with the Low-Shelf Filter.
Boosting Low Frequencies: If the low frequencies are too weak, you can enhance them to achieve a balanced frequency response.
Adjust the Low-Shelf Filter accordingly to address any issues in the low frequency range caused by your room's acoustics.
The LED Mode determines how the LED ring displays the volume level. There are four available modes:
Bright Ring: All LEDs up to the selected volume level light up brightly. As the signal gets louder, he brightly lit ring extends.
Bright Point: Only the LED corresponding to the selected volume level lights up brightly. As the signal gets louder, the brightly lit point moves further up.
Dim Ring: All LEDs up to the selected volume level light up dimly. As the signal gets louder, the dimly lit ring extends. The LEDs light up brightly momentarily when you adjust the volume.
Dim Point: Only the LED corresponding to the selected volume level lights up dimly. As the signal gets louder, the dimly lit point moves further up.
In all modes, the LEDs indicate volume levels, adjusting in four steps. Intermediate steps are shown by the brightness level between two adjacent LEDs.
All facts and figures in detail
Width x Hight x Depth in mm
-3 dB at 1 m distance
Max. SPL per pair
Output power per speaker
Diameter
Diameter
Cross-over between drivers
These products may also be interesting to you
Our products are available at trusted distributors and dealers all over the world
© 2024 EVE Audio GmbH
